How to Replace Projector Lamp

How to Replace Projector Lamp

The lamp life of Projectors is about 4000 hours if the Power Consumption of Projector is set to normal and is 5000 hours in the ECO mode. Lamps manufactured before year 2000 have life about 1000 hours but the lamps manufactured after that have normally life about 2000 to 6000 hours.

When Projector lamp should be replaced

  • When the projected image gets darker or starts deterioration.
  • On the Projector screen “Replace the Lamp” message is shown.

How to Replace Lamp

  • Turn off the projector and take off power cable
  • If you are going to replace lamp immediately after using projector for some hours, then let the projector cool for at least 1 hour, As lamp will be hot immediately after using projector.
  • Loosen the lamp cover and then slide the lamp cover off.
  • Loosen screws that are holding lamp in position.
  • Hold the lamp and pull it straight up.
  • Now insert the new lamp and tighten it with screws.
  • Place the lamp cover at its position and tighten its screw.
  • Now Reset the Lamp timer.

How to Reset Lamp Timer

  • Press the Menu button on the projector control panel OR on the Remote control.
  • Go to Reset button and press Enter.
  • Go to Reset lamp Hours and press Enter.
  • A window will prompt, Go to Yes and press Enter.
  • Now press Menu to Exit.

How to Check Lamp Usage

  • Press the Menu button on the projector control panel OR on the Remote control.
  • Go to Info and see the window appeared.
  • You will see the Normal and Eco Hours usage there.  

Share this post

3 thoughts on “How to Replace Projector Lamp

  1. Pingback: Champ

  2. Pingback: Freddy

  3. Pingback: Austin

Post Comment